Benzene, C14-30-alkyl derivatives, YC-HTF-5

Equal to Therminol 55

Optimum operating temperature: -25℃ to 300℃

The synthetic heat transfer fluid is suitable for moderate temperature applications. It is designed for use in non-pressurized / low-pressure, indirect heating systems. This heat transfer fluid delivers efficient, dependable, uniform process heat with no need for high pressures.

Specification
Item Standard Test Method
Appearance Clear, transparent liquid Visual test
Autoignition temperature ℃ 330 min SH/T 0642
Flash point(closed cup) ℃ 175 min GB/T 261
Flash point(open cup) ℃ 180 min GB/T3536
Sulfur ppm 10 max GB/T 3208
Chloride ppm 20 max GB 23971
Acid value mg KOH/g 0.05 max GB/T 7304
Copper corrosion (100℃,3hr) ≤1 GB/T 5096
Moisture mg/kg 100 max GB/T 11133
Water soluble acid/alkalis Not detectable GB/T 0259
Pour point ℃ -50 max GB/T 3535
Density 20℃ kg/m3 860-880 GB/T 1884
Ash m/m % 0.01 max GB/T 508
Distillation range Initial boiling point 2%/℃ Report 325 min GB/T 6536
Carbon residue m/m % 0.05% max GB/T 17144
Kinematic viscosity (mm2/s) 40℃ 100℃ 15-25 report GB/T 265
Thermal stability (300℃, 720 hr) Appearance Deterioration rate % Transparent, no suspended solids or precipitation 10 max GB/T 23800

*The above listed typical data, and test data vary from samples.

Packing

170kgs/drum, 13.6mts per FCL or as per user’s requirement.

Related Products

Diphenyl Oxide-Biphenyl Eutectic Hydrogenated Terphenyl Benzyl Toluene Dibenzyl Toluene (DBT) Diaryl Alkyl Reaction Mass of Diisopropyl Biphenyl and Triisopropyl Biphenyl Inhibited Ethylene Glycol-based Heat Transfer Fluid

Request form